Product ID:DELTA LOW VOC POLYURETHANE ENAMELS, DHS
MSDS Date:03/18/1993
FSC:8010
NIIN:00N027048
MSDS Number: CBBQB

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

EXPOSURE LIMITS, LEL BELOW STATED LIMIT & TO REMOVE

RTECS: 9999999ZZ

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 60-65%

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TO THE CNS, HEMATOPOIETIC TISS, BLOOD, KIDNEYS &

RTECS: 9999999ZZ

ACETATE (EGBEA). (EXTRACTED FROM DHHS (NIOSH) PUB NO

RTECS: 9999999ZZ

CNTNS BENZOTRIAZOLE-BASED LIGHT STABILIZER.

RTECS: 9999999ZZ

RSLTD IN ADVERSE KIDNEY, LIVER & POSS REPRO ORGAN

RTECS: 9999999ZZ

ETHYLENE SERIES GLYCOL ETHER &/OR ACETATE WHICH HAS

RTECS: 9999999ZZ

BLOOD &/OR BLOOD-FORMING TISS. THERE IS NO

RTECS: 9999999ZZ

DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF TITANIUM

RTECS: 9999999ZZ

STUDIES W/HUMANS INVOLVED IN MFR OF THIS PIGMENT

RTECS: 9999999ZZ

INHAL OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS

RTECS: 9999999ZZ

OCCUR DURING/FOLLOWING USE OF THIS PROD,

RTECS: 9999999ZZ

INFORMATION AVAILABLE.

RTECS: 9999999ZZ

CAREFULLY TO DETERMINE TYPE OF AIRBORNE

RTECS: 9999999ZZ

TO BE PROPERLY FITTED.

RTECS: 9999999ZZ

2-(2'-HYDROXY-3',5'-DI-TERT-AMYLPHENYL)BENZOTRIAZOLE;

CAS: 25973-55-1

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENTS

Fraction By Weight: 50-55%

OSHA PEL N/K

ACGIH TLV: N/K

2-HEPTANONE; (METHYL N-AMYL KETONE)

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 25-30%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE) (SARA 313)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 2-5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 75 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

HEXYL ACETATE; (OXO-HEXYL ACETATE)

CAS: 88230-35-7

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

ETHANOL, 2-BUTOXY-, ACETATE; (2-BUTOXY ETHYL ACETATE)

CAS: 112-07-2

RTECS: KJ8925000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
EYES:IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL DISTURBS MAY
INDICATE EXCESS EYE CNTCT. SKIN:MAY CAUSE MOD IRRIT. MAY BE
ABSORBED THRU SKIN. PRLNGD/RPTD CNTCT MAY CAUSE ALLERGIC SKIN RXN.
DRYNESS, ITCH, CRACK, BURNING, REDNESS & SWELL ARE CNDTNS ASSOC
W/EXCESS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: SKIN CNTCT. INHAL:VAP & SPRAY MIST
HARMFUL IF INHALED. VAP IRRITS EYES, NOSE & THROAT. RPTD EXPOS TO
HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN & NERVS SYS
DMG. INTENTIONAL MISU SE BY DELIB CONC & INHAL CONTENTS CAN BE
HARMFUL/FATAL. EYE WATERING, HDCHS, NAUS, DIZZ & LOSS OF
COORDINATION (SUPDAT)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: IF SWALLOWED, DO NOT INDUCE VOMIT. EYES: IN CASE OF
CNTCT, FLUSH IMMED W/PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN: IN
CASE OF CNTCT, FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY WASHING
W/SOAP & WATER. INHAL: IF AFFECTED BY INHAL OF VAP/SPRAY MIST,
REMOVE TO FRESH AIR. APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS
REQD. OTHER: IF INGEST, ANY TYPE OF OVEREXP OR SYMPS OF OVEREXP
(ING 18)

Flash Point Method:PMCC
Flash Point:60.0F,15.6C
Lower Limits:1.2%
Extinguishing Media:NFPA CLASS IB EXTINGS (CO*2, DRY CHEM/UNIVERSAL AQ
FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS IB FLAM LIQ FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Spill Release Procedures:PROVIDE MECH VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE OR OTHER A BSORB MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE AVOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IB FLAMMABLE LIQUIDS.
Other Precautions:IF THIS MATL IS PART OF MULTIPLE COMPONENT SYS, READ
THE MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTG MIX MAY
HAVE HAZS OF ALL OF ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FR EE FALL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST OR FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
AIR PURIFIYING OR AIR SUPPLIED (TC- C) RESPS MAY ALSO REDUCE
EXPOS. READ RESP MFR'S IN STRUCTIONS & LITERATURE (ING 20)
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF LISTED INGS BELOW LOWEST SUGGESTED (ING 22)
Protective Gloves:NITRILE RUBBER OR NEOPRENE RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: & POSS AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT.
IF WATER IS USED, FOG NOZZS ARE PREF. EXPLO HAZ: SURFS. TOX GASES
MAY FORM WHEN PROD IS CONTACTED BY FLAME/HOT SURFS. EFTS OF OVER
EXP: ARE INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. CHRONIC: ANIMAL
STUDIES HAVE SHOWN DOSE-RELATED ADVERSE EFTS (ING 9)

Boiling Pt:B.P. Text:>167F,>75C
Vapor Pres:2-8
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.8
Evaporation Rate & Reference:59 (BUAC=100)
Solubility in Water:0.1%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
LISTED SOLVENTS.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING OR FLAME-CUTTING MAY PRODUCE FUMES
INCLUDING CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.